Light intensity and temperature sensors; with white, green, yellow, red and blue signal LEDs and a buzzer. RS-232 communication. Uses an AVR ATmega8 microcontroller.
AVR alarm disabling unit for production equipment
Simple unit to silence the audible alarm on a production equipment, uses an AVR ATtiny2313 microcontroller.
Serial port I/O module with 9 in and outputs — AVR
RS-232 interface module, with 9 inputs and 9 outputs. Uses an AVR ATmega8 microcontroller.
Home power consumption measuring unit, with AVR
Measures the power consumption by counting LED pulses from the home fuse box. Measurements can be read via a serial interface, uses the AVR ATtiny2313 microcontroller.
Serial port I/O module with 11 inputs — AVR
RS-232 input module, with 11 inputs. Rebuild of previous RS-485 module. Uses an AVR ATtiny2313 microcontroller.
AVR mood light, 500mA per channel
Turn any RGB LED into a mood light with this controller. Uses an AVR ATmega8 microcontroller.
Light sensor with LED display, AVR controlled
Measures light intensity and shows the value on a LED display, if value passes over/under the set point the output is enabled. Uses the AVR ATmega8 microcontroller.
4-channel electronic switch and voltage regulator
Electronic switch for LED lights, 4 channels, 9 to 24 volts in, 5 volts out. Uses an AVR ATtiny2313 microcontroller.
AVR alarm disabling unit for production equipment with long stop warning
Simple unit to silence the audible alarm on a production equipment, additional warning if not resolved within 30 or 60 minutes. Uses an AVR ATtiny2313 microcontroller.